Professional Surge-Protecting Power Strip and 4-Port USB 3.0 Hub
- Integrated 4-port USB 3.0 hub - connect external hard drives, bus-powered controllers and other USB peripherals
- Six surge-protected AC power sockets
- Four USB 3.0 type A sockets for data or charging
- One USB 3.0 type B connector for connecting to a PC
- One 2.1A USB type A connector for mobile device charging
Angle
Front
In Use
Old-fashioned power strips just aren’t up to the task of powering all the devices you have today. Some of your equipment still uses the traditional AC power plug, but much of the gear you currently own—and will own tomorrow— is powered by USB. It would be nice to have a single power strip that handles everything at once.
That’s exactly what the PD11 Power Strip does for you. You can connect 11 pieces of equipment at the same time, with six AC outlets and five USB ports. One of the USBs is a dedicated 5V 2.1A charging port, for even greater convenience. You’ll also enjoy full-speed data communications over USB 3.0, backwards compatible with USB 2.0 devices.
Sometimes, it’s the really simple “How come no one thought of this before” items that make our lives easier and more satisfying. That’s the Alto Professional PD11 Power Strip.
TECH INFORMATION
- Maximum Output Current: 15 amps
- Line Cord: 6 ft., captive, 14 AWG, with 3-conductor Edison plug
- Operating Voltage: 120 VAC, 60 Hz
- Spike Protection Mode: Line to neutral
- Spike Clamping Voltage: 185 VAC peak @ 3000 amps
- Energy Dissipation: 1800 joules
- Maximum Surge Current: 6000 amps
- Maximum Continuous Operating Voltage: 130 VAC RMS
- Response Time: 1 nanosecond
- Noise Attenuation: 10 db @ 10 kHz; 40 db @ 100 kHz; 50 db @ 500 kHz
- USB Charger: 5 V, 3.1 A
- Dimensions (width x depth x height): 3.8” x 3.4” x 1.6”; 96 mm x 86 mm x 41 mm
- Weight: 2.6 lbs.; 1.2 kg
LEGACY ACCESSORIES Series
-
Professional Surge-Protecting Power Strip and 4-Port USB 3.0 Hub
-
Adjustable Speaker Tripod for MIXPACK Express
-
Portable Adjustable Speaker Tripod
-
Slip-on Padded Speaker Cover for TRUESONIC TS112 & TS112A
-
Slip-on Padded Speaker Cover for TRUESONIC TS115 & TS115A
-
TOURMAX Line Array Flybar
-
TOURMAX SXA28P Speaker Connector Hardware
-
TOURMAX SXA18P Subwoofer Connector Hardware
-
Rack mount kit for 1 pcs 1 / 2 rack size product
-
Rack mount kit for 2 1 / 2 rack size product
-
Rack mount kit for 3 pcs DI1
-
Rack mount kit for 1 pcs DI1
-
Cross - Fader for DJM - 2 Mixers (45mm)
-
Cross - Fader for DJM - 3 Mixers (45mm)
-
Connectors for MP8D
-
Connectors for MP8D
-
Stand for PAM5 SERIES
-
Stand for M3
-
Stand for M4/M5
-
Water proof cover for PS 4/PS5/SR500A
-
Stand for WDA-250 series
-
Stand for WDA-80 series
-
Rack mount lit for 1 pcs MOD-800/AU-800
-
Rack mount kit for 2pcs MOD-800/AU-800
-
Gooseneck lamp with BNC Connector
-
Gooseneck lamp with BNC Connector
-
With BNC Connector-450mm(18")
-
For MOD-800H / AU-800H / MOD-16H / U-16H
-
Power and signal distribution panel
-
Stand for one or two SAT 208P
-
Hardware for SAT 208P
-
Hardware for SUB 118P
-
Flying bar for fly SAT 208P & SUB 118P
-
Speaker pole for satellite & subwoofer separation
-
Flight case for 4xSAT 208P and SAT-HD
-
Flight case for 2xSUB 118P and SUB-HD, FB-1
-
U-BOLT for REVO FB-1
-
Abs case 10U on wheels and trolley for D series amplifiers
-
Abs case 6U on wheels and trolley for D series amplifiers
-
Abs case 8U on wheels and trolley for D series amplifiers