Incredible portability with power to spare.

Built to Travel
Just grab the handle, wheel the Mixpack Pro into position, slide the satellite speakers off and discover a full-featured, on-the-go PA system. In addition to the 8-channel mixer, your Mixpack contains a 15" subwoofer and two satellite speaker cabinets, all driven by 1000 Watts of pure Class AB power.

Mix to the Max
Mixpack features an 8-channel mixer. Inputs include XLR, line, and RCA jacks so you can connect any audio source, from musical instruments to microphones to an iPod. Each channel features a 3-band EQ for shaping the tone, along with dual 7-band master EQs. Alesis-driven effects add a professional finishing touch to your sound. There are sixteen variations of each of the 16 effects, for an amazing total of 256 available programs. The entire mixer section can be quickly removed and rack-mounted for easy access.

One Thousand Watts!
The Mixpack Pro is surging with an unbelievable 1000 Watts of pure Class AB power. The 15" subwoofer gets the sound pumping, while two satellite cabinets deliver clean mids and highs. Each cabinet is home to a pair of 6.5" drivers and 1” tweeter. The integrated handle and wheels make moving the whole rig a breeze. Put simply, there has never been an easier and more powerful way to bring this much sound to any location. Stands are included and tuck neatly within the cabinet for transport, so you can get the sound where it needs to go without any hassle.

TECH INFORMATION

Type: 3-Way Powered System Bi-Amp plus passive crossover into satellite
Low Output Power: 230 Watts RMS Class AB 
MID-HIGH-Output Power: 120 W + 120 Watts RMS Class AB
Peak Power Ratling: 1000 Watts Peak
Maximum SPL @ 1m: 119.5 dB Continuous - 122.5 dB Peak (calculated) 
Frequency Response:  45 Hz - 20 kHz @ -10 dB
Impedance: Low-Mid/High Low 4 Ohm - Mid/high 8 Ohm 
Crossover Frequencies: Active 125 Hz at 12 dB / Oct - Passive 3000 Hz at 12 dB / Oct with Electronic Dynamic Protections
Amplifier Protections: Low-Mid / High Soft start - Short Circuit - DC output voltage - Thermal Protection - Subsonic Filter at 30 Hz - 24 dB / Oct - Limiter / Compressor 
Low Frequency Device: 15" / 385 mm - 2.5" Voice Coil 
Mid Frequency Device: 4 × 6.5" / 165 mm - 1.5" Voice Coil
High Frequency Device: 2 × 1 "Compression Driver - 1" Voice Coil
Horn Coverage: 80° H × 80° V
Enclosure: Plastic Reinforced Cabinet Polypropylene

Mixer Section
Microphone Input: Electronically balanced discrete input configuration
Frequency Response: 10 Hz to 55 kHz +/-3 dB
Distortion (THD&N): 0.04% at +4 dBu 1 kHz
Gain: 35 dB
SNR (Signal to noise ratio): ＞94 dB
Line input: Electronically balanced 
Frequency Response: 10 Hz to 55 kHz +/-3 dB
Distortion (THD&N): 0.04% at +4 dBu 1 kHz
Gain: 15 dB

Stereo input / Output
Line input: Unbalanced
Frequency Response: 10 Hz to 55 kHz +/-3 dB
Distortion (THD&N): 0.04% at +4 dBu 1 kHz

Impedances
Microphone Input: 1.4 kOhm
Channel insert retum: 2.5 kOhm
All other inputs: 10 kOhm or greater
Tape out: 1 kOhm
All other outputs: 120 ohm

Equalization
Hi shelving: ±15 dB @ 12 kHz
Mid bell: ±15 dB @ 2.5 kHz
Low shelving: ± 15 dB @ 80 Hz

Alesis DSP Section
A/D and D/A converters: 24-bit
DSP resolution: 24-bit
Type of effects: Hall, Room, Vocal & Plate Reverbs, Mono & Stereo Delay (max Delay Time 650ms), Chorus, Flanger & Reverb Modulations, Reverbs, Stereo Delay, Chorus, Reverb + Delay and Reverb + Chorus combinations.
Presets: 256
Controls: 16-position preset selector 16-position Variation selector 

Controls & Monitoring
16-position preset selector
Clip LED
Mute Switch with LED indicator

Main Mix Section
Noise (Bus noise)
Fader 0 dB channels muted: -85dB (ref:+4dBu)
Fader 0 dB all input channels assigned and set to unity gain: -81 dBr (ref: +4 dBu)
Max output: 27 dBu balanced
Controls: 22 dBu balanced 1/4" jacks
AUX Sends: Max out 22 dBu
Power Supply: AC - 220 / 240 Volt or AC-100 / 120 Volt, with Switching Power Mode.

Dimensions (WxLxH): 1060mm x 700mm x 700mm
Weight: 111.8 lb